PERHAPS I’LL HAVE TO DO THIS SOON, MYSELF! YOU DID A REALLY GOOD JOB OF IT!
I have a baseboard and a printed 1:1 scale trackplan. I want to transfer the plan from the printout to the baseboard so that I can lay the track according to the plan. First, I stuck the trackplan in place using masking tape.
On the plan SCARM adds a straight line at the ends of the points (switches). I cut through the paper along these lines with a craft knife. Additionally, I made cuts along the rails at each end of the point. Then drew the position of the lines with a marker pen, drawing through the paper onto the cork.
To mark the rest of the track I pushed a scriber through the paper at the ends of each sleeper, then pushed the marker pen through each hole to create a dot on the baseboard.
This gave me the position for each point, and dotted lines marking the position…
View original post 71 more words